CarPVB or coating with recycled PVB

Centexbel and partners are looking for methods to recycle and reuse r-PVB in interesting new applications!

Polyvinyl butyral (PVB) is mainly used in the production of laminated safety glass. Each year, around 100 000 tonnes of PVB are being produced and processed into windshields. But until now, little or nothing is done with the heaps of PVB from all those broken windshields...



Pelvic organ prolapse (POP) is characterized by the descent of pelvic organs from their normal positions. In women, the condition usually occurs when the pelvic floor collapses caused by age or successive pregnancies. This phenomenon hits one out of three women, or more than 2 million women in the region Belgium and Hauts-de-France and even 60% of women over 60.


The F³D Print project intends to develop and evaluate a very innovative process that will bring product customisation to the next level. The direct 3D printing of functional add-ons on textiles will introduce a more customer-specific approach.


Designing the railway of the future: Fire resistant composite materials and smart modular design

mat4rail-logo-1_0.jpgInnovative materials and modular design for rolling stock are considered to become key to success in Europe’s railway industries.

Composite materials with their unique properties, such as lightness or reparability have demonstrated a high potential for lighter, more energy- and cost-efficient structural components in relevant sectors such as aeronautic or automotive industries.

Textile odour management - TOM

The reduction of bad odours on textiles is an important means to improve the wear comfort, product quality and lifetime of textile products, which are difficult to clean on a regular basis.


life-flarex_0.png The project, carried out by a consortium of seven members, has the objective to reduce the impact of flame retardants used in the textile industry and their future alternatives, on the environment, human health and on the safety of industry workers by analysing their environmental impact and functionalities. LIFE-FLAREX will promote substitution within the European companies of the sector.


Fibre reinforced thermoset composites (FRTCs) are attractive materials for high demanding sectors, such as automotive or construction, because of their lightweight and excellent mechanical properties. However, the lack of reprocessability and difficulty for repairing and recycling significantly increases the overall material cost and causes grave environmental concerns. Additionally, the vast majority of polymer matrices and fibres used in their manufacturing are non-renewable fossil-derived materials or require high amounts of energy for their production.


The objective of the FeneCom project is to develop efficient methods to cure composites made from carbon, aramid and basalt and other composites containing non UV-transparent fibres.


MDTex aims to create a cross-border French-Belgian cluster in the field of medical textiles. By combining their networks and competences, the partners will remove the borders between the "health" and "textiles" value chains in order to unite the necessary spear point expertise and technologies to develop products.


FIBFAB - Industrialization of Biobased Textile Fabrics for Clothing Applications - aims at a successful industrial production of biodegradable and sustainable polylactic acid (PLA) based fabrics (wool/PLA and cotton/PLA) for clothing applications.


ECO-DWOR will examine the use of various technologies for textile and leather finishing to replace C8 and other fluorocarbons. The implementation of alternative non-toxic repellents in finishing and low surface tension coatings will be evaluated according to their repellency, stain release and easy-clean behaviour.


According to European Commission, 13.1 million tons of poultry meat was produced in the European Union (EU-28) in 2014 with an estimated generation of 3.1 million tons feather waste. At present the majority of poultry feathers are converted into low nutritional value animal food or disposed in landfills, causing environmental and health hazards.


The evolution in product requirements resulted in the development of complex products made from different materials, which makes a homogenous separation difficult and expensive.


The objective of the project is to develop an innovative portable multi-sensor device for the medical surveillance of hospitalized patients (continuous measurement of vital and non-vital parameters) that must be comfortable for the hospital patient as well as compatible with the hospital’s computer system in the Meuse-Rhine region.


The use of carbon fiber (CF) based composites is of growing importance in many industrial applications with the current global market estimated at $28Bn. However, the current high cost, limited production capability in Europe and the use of petroleum-based polyacrylonitrile (PAN) as the precursor fiber (PF) from which the CF is ultimately derived, requires the development of innovative routes to industrial production.


The TEXTOS project will develop an innovative 3D-matrix for tissue technology to reconstruct, regenerate or replace the tissue structures of deficient organs. This matrix consists of carrier material produced from natural polymers made from crops.


Mechanical energy recovery (MER) systems are used to produce renewable electricity adapted to the low voltage batteries applied in several electronic devices, such as smartphones.


The RECY-COMPOSITE project addresses the problems related to the mechanical and chemical recycling of composite materials (pyrolysis and solvolysis) and the energy recovery if recycling is not possible. The applied research is conducted on the production waste stream of thermo-curing composites and of end-of-life in thermo-curing and thermoplastic composite materials.


Thermoplastic elastomers (TPE), including shape memory polymers, belong to a polymer family offering many possibilities but demanding a high degree of competence to be converted in a good and rational way into an additive or as such.


The RETEX aims to restructure the textile value chain to fit the circular economy by:

  1. putting economic actors to the disposition of the textile industry
  2. reassessing the "end-of-life management system of textiles"
  3. stimulating the market demands of products containing recycled materials


Composites are major materials in the field of energy saving, recycling and environmental preservation. It is expected that the composite market will grow by an annual 15% within the period of 2008-2020. Thanks to their weight reduction, superior specific strength, durability, corrosion resistance and the possibility to be converted into complex shapes, composite polymer materials with long fibre reinforcement are very attractive for applications in automotive (cars, public transportation, space navigation, shipbuilding…), a dynamic industrial sector in Northern France, Wallonia and Flanders.


RECYSITE aims to demonstrate recyclability and reuse of a new generation of high performance fibre-reinforced thermoset composites from renewable resources (bio-waste)


The project aims to improve the logistics and treatment of waste, such as furniture, mattresses, upholstery, textiles and plastic garden products by means of innovative and patented separating techniques that will generate a net profit of 225 euro per ton.


The Interreg France-Wallonie-Vlaanderen project “Duratex” aims to develop a dirt repellent and antimicrobial textile for durable applications in construction and architecture. The developed methodologies will respond to the requirements of the textile industry (cost, production speed, complex functionalities). Moreover, they will be ecological and applicable by means of the existing machinery.


The project will screen the application possibilities and preferred processing conditions of polybutylene succinate (a biobased polymer) in textile applications.


The interest in “smart textiles” and the integration of new energetic functions is growing over the past few years. These novel textiles may play a major role in energy storage and/or processing or in the field of information and communication. Textiles have several advantages: flexibility, light weight and a broad application area including signalisation (flags and banners) and architectural design (decoration, curtains…).


The general objective of FuPLATex is to enable companies of the target group to develop market products made from renewable thermoplastics with a maximum added value. The main attention goes to highly sustainable products with additional functionalities.


CENTEXBEL, the Belgian research centre for textiles and plastics, and IBA, the global leading supplier of electron beam and X-ray solutions for industrial applications, located in Ottignies-Louvain-la-Neuve, are the Belgian partners in BIO4SELF, the newly approved European Horizon 2020 project. CENTEXBEL and IBA will contribute to the development of novel PLA materials for composites together with their European consortium partners from 10 different countries.


The objective of FOCuS is the development of a new test method for the appearance change of rigid textile floor coverings.

Spun Eco Yarn

The project intends to increase the product range of spun PLA yarns and blend yarns and to improve their properties. Only if high-quality biobased yarns are obtained with properties comparable to non-biobased yarns, an increase of the implementation of biobased spun yarns in a number of applications can be expected.


Le projet ATISOLC2C a pour but d’élaborer et de mettre sur le marché une nouvelle membrane d’étanchéité à l’air auto-adhésive basée sur des matières végétales et/ou renouvelables, bénéficiant d’une certification "Cradle to Cradle".


3D printing, more generically known as additive manufacturing, is rapidly expanding and can be subdivided in many 3D printing technologies including Fused Deposition Modelling (FDM), Digital Light Processing (DLP) and jetting. By means of these technologies all kinds of products can be printed without the need of (expensive and less sustainable) assembling techniques. However, the market provides only a limited choice of printing materials. An innovative development of these materials is needed, especially in the field of bio-based polymers, as a sustainable variant.

The Blue Chain

Greenhouse cultivation in Flanders and Holland is jeapordised by increasing costs and global competition. The authorities of both regions therefore support the transition and modernisation of this sector. One route is to enrich the existing offer by means of the commercial cultivation of microalgae for applications in food and textiles, construction, pharmacy and cosmetics.

VALERIE Customer Value to Business Value

How to develop successful new or improved products and services based on the ideas of clients that will create value for the customer and guarantee your business success?

The general goal of the project is to expand the User Centred Design methodology to a User Centred Value & Business Design methodology with only one single standard method and a minimal use of (external) guidance.

Concrete project goals:


SeaRefinery will develop eco-friendly chemical and enzymatic processing technologies to extract and purify high value-added components such as antioxidants, antimicrobial components and hydrocolloids from cultivated seaweed species (e.g. Saccharina latissima) in an integrated biorefinery. Bioactive compounds, e.g. phlorotannins, fucoidan, and laminarin, will be selectively tested for bioactivity. In addition, laminarin and marine proteins will be tested in nutraceutical and selected food model systems.


Le projet "Macobio : MAtériaux Composite BIOsourcés", fait partie du portefeuille FEDER 2014-2020 « Low Carbon Footprint Materials » et est orienté vers le développement de matériaux composites biosourcés à résines thermoplastique et thermodurcissables. La recherche s’attardera sur les points critiques liés à l’utilisation de produits biosourcés : la gestion thermique, la réologie, les interfaces fibres-matrices et les assemblages.


Celfi promotes and supports the development, production, application and recycling of WPC by means of TECHNOLOGICAL CONSULTANCY about raw materials and auxiliaries, standards, test methods, application and assembling techniques related to WPC, about various application fields, including construction, furniture, decoration, transport, packaging and toys, and about recycling techniques and materials.

Green Constructions

'Investing into Green Infrastructure (GI) makes sound economic sense – a single area of land can offer multiple benefits, provided its ecosystems are in a healthy condition. Such healthy ecosystems, which are powered by the diversity of life within them, provide society with a stream of valuable, economically important goods and services such as clean water and air, carbon storage, pollination etc. They also play a central role in fighting climate change impacts by protecting us against floods and other environmental disasters.
Source: European Commission, Building a Green Infrastructure for Europe

Free Foaming

To give a competitive and ecologically valid answer to the increasing demand of foam polymer products (strong demand of insulation materials, lighter plastics, etc.), it is necessary to reconsider the foaming technology and the chemical agents that are being used.


The main goal of the PLAsticised project is to develop optimised plasticiser-PLA formulations for both existing PLA extrusion applications and newly to be developed applications in coating, printing and hotmelt technology.


By developing plasma deposited coatings on textile and polymer materials, with a controllable release of the antibacterial agents, Plasmatex will answer to the need of the medical and health sector for effective antibacterial wound dressings.


Patecs is a CORNET-IWT project aimed at promoting adhesion in textile composite structures.


Smart wearable sport and health solutions

ITEA Project 13034


Brandgevaar ontstaat wanneer de geschikte omstandigheden aanwezig zijn: brandbaar materiaal, zuurstof en ontstekingsbron. Kunststoffen ontbranden gemakkelijk, bereiken hoge temperaturen tijdens de verbranding en ze geven toxische gassen vrij.

AFFITEX: anti-fouling films on textiles

Fouling is the accumulation of unwanted material on surfaces. The fouling material can consist of either living organisms (biofouling) or a non-living substance (inorganic or organic).


Because of the growing concern about the availability and sustainability of raw materials for various manufacturing processes, research & Development of raw materials and energy sources based on renewable resources have become a priority in Europe.


Additive Manufacturing (AM), better known as “3D-printing” is one of the most important technological evolutions of this moment. Additive Manufacturing includes a whole series of techniques to build up an object layer by layer. Different techniques, such as stereolithography, selective laser sintering, fused deposition modelling and electron beam melting... allow to 3D print a varied choice of materials (from metals, plastics, ceramics, paper, food to even concrete).


I-TEX richt zich hoofdzakelijk tot B2B textielbedrijven in Vlaanderen die de ambitie hebben om via e-commerce hun business model te transformeren. De transformatie gaat van een model waar producten worden verkocht via tussenschakels naar een business model waar de producten niet enkel via distributeurs, maar ook via e-commerce aan de eindklant worden verkocht.

MoTex: monitoring textiles

Sports or physical exercises are known to have a positive effect on chronic diseases such as obesity, diabetes, heart disease, depression, and osteoarthritis. In the prevention and rehabilitation of these chronic diseases it is important that the patient regularly and correctly performs specific exercises, as prescribed by a therapist. Therefore, it is important that the therapist knows whether the patient performs the exercises at home (adherence), and in which way he performs them (quality).


One of the biggest challenges of the industry is to produce in a sustainable way. As a consequence, the reduction, re-use, and upgrade of waste is becoming increasingly important. Moreover, the rising prices of raw materials are pushing the industry to economize on raw materials and energy.


The aim of the project “Blends 4 Innovation” is to broaden the research on intimate polymer blends in textiles and to demonstrate the value of polymer blends in the textile and composite markets. To this end, the use of polymer blends will be diversified to a larger range of polymer combinations and composition ratios.


InnoQuality will support interior textiles companies by means of an Inno-Guide. The aim of the Inno-Guide is to optimise the innovation flow within the interior textiles companies.

Flemish interior textiles companies find it hard to survive in a very competitive market. These companies must innovate more rapidly and effectively.
Although the companies do not lack ideas, the problem is to select the right ideas that have to be developed into products.

SET: Save Energy in Textile SMEs

SET_final_report_cover.png The SET project has delivered its results in 12 languages. The SET scheme is based on a new software for companies to monitor their energy consumption, learn best practices, and benchmark their own energy performance with their competitors or similar companies.


Polyurethane (PU) textile coatings are very versatile and used in various applications with high demanding requirements. For some applications, PU is the only appropriate coating material, thanks to the following properties:

  • ability to be used in dry-cleaning
  • low temperature flexibility
  • high mechanical properties (tensile and tear strength)
  • outstanding abrasion resistance
  • flexibility and softness


The interest in biopolymers is growing fast. Biopolymers such as TPS (thermoplastic starch), PLA, PHB find more and more industrial applications. While starch based products are most often used in packaging applications, the biopolyester are more often applied in higher value and more durable applications such as for instance technical textiles, or combined with natural fibres in biobased composites. Such types of applications are amongst others investigated in previous or running CORNET projects such as NATUREWINS and Biobased Self Reinforced composites (BIO-SRPC).


Textiles are fulfilling relevant functions in different fields of application. High strength textiles in form of ropes, belts, nets, etc. are used in specific applications for securing objects or people. Examples are securing of cargo ladders, people on construction sites, heavy weight lifting belts and nets, and other applications like mountaineering ropes and parachute strings.


The dyeing of polyester textile materials, used commonly in automotive, with disperse dyes presents a number of practical problems to the textile industry. These problems are principally associated with unevenness, lack of reproducibility, and bare effects, essentially coming from the structural non-uniformities of the polyester yarns. During numerous manufacturing and processing steps prior to dyeing, this material is subjected to various thermo-mechanical treatments which may give rise to variations and non uniformities in structure.


Sudden Infant Death Syndrome (SIDS) is the highest cause of death in the post‐neonatal period (between the 2nd and 6th month of life). In Europe, each year 2400 infants still die of SIDS, an unexpected disease happening to infants who die in their sleep with no evidence of accidental asphysia, inflicted injury or organic disease; being a multifactorial syndrome mainly related to overheating, prolonged apnea, gastroesophageal reflux or inadequate bedding system and posture.


The objective of the project is to demonstrate and to improve the environmental performance of best innovative solutions that are emerging with regard to technical textiles that incorporates nanoparticles in textile finishing industries. Environmental, health and safety impacts will be assessed into its manufacturing operations, and the integration of green technologies will be highly encouraged. The term “green technologies” is defined as “manufacturing processes or product technologies that reduce pollution or waste, energy use and material use in comparison to the technologies that they replace”. The project will be focused on environmental sustainability, notably eco-design of textile finishing processes that incorporate nanoparticles for technical applications in textiles, as for example the biocide, sunscreen, fire-retardants/fireproof, abrasion -resistant, dirt-repellent, self-cleaning, antistatic or hydrophobic and oleophobic finish.


Planting trees in a more sustainable and efficient manner

Without adequate maintenance, a large part of newly planted or seeded trees will die. This maintenance is expensive and still makes use of unsustainable techniques such as herbicides, fossil fuels or petroleum-based products, and large volumes of water.


In the last decade, advanced textiles materials have been developed as a result of a number of research and innovation projects addressing in particular the construction sector, which represent one of the biggest markets for textile products.


Major trade fairs are showing an increasing number and variety of smart textile and wearable intelligence prototypes for all kinds of applications that will eventually alter our lives.


Validation and commercialisation of improved solutions for rest systems from ALL4REST Project

The integrated solutions developed during the previous ALL4REST project (tactile/thermal comfort improvement, quantitative and qualitative evaluation of comfort or sleep quality) were based on new biofibres, the integration of thermoregulating systems, and on the use of new hotmelt adhesives, heatable textiles and microencapsulated scents for aromatherapy.


Electroluminescent light bulbs (EL) and organic led (OLED) are efficient, thin and eco-friendly light sources. The existing systems are usually based on hard glass sheets. Flexible lamps on thin metal of plastic foils are being investigated. However, they only allow a bent shape or show a poor mechanical strength.


In times of rapidly increasing energy prices and growing eco-consciousness, textile finishing looks for modern, eco-friendly, energy and cost effective application and curing systems. To date, the textile industry still uses energy-consuming techniques for water and solvent removal and as well as for curing after (wet) chemical treatments.


The interest in biopolymers is growing fast. Especially PLA finds interesting industrial applications, more and more in durable end products like technical textiles and not only in disposables. Previous research has shown that PLA fibres can be made to have very good mechanical properties, including high tenacity and a much higher elongation than neat PLA. The fact that there are multiple PLA grades with a range of melting points opens up the possibility of developing self-reinforced PLA composites, a domain which has previously not been explored.

Additive Manufacturing

Future key-technology to upgrade textiles and plastics processing

Additive Manufacturing (AM) is a term defining the production of tangible objects by means of digital tools. This approach, often called 3D-printing, differs in a radical manner from conventional production methods in that it produces the objects by the selective layering of materials instead of by machining or casting methods.


In samenwerking met Centexbel startte het Textiel onderzoeklabo TO2C van de vakgroep Mode-, textiel- en houttechnologie van de Hogeschool Gent op 1 februari 2013 het IWT TETRA-project ProCOM op. Zowel in de normalisatiecommissies, tijdens de productontwikkeling als bij de aankoop van werkkleding wordt te weinig aandacht besteed aan de comforteisen van de eindgebruiker. Ook het wassen/onderhoud heeft een grote invloed op zowel de kwaliteit als het comfort van werk- en beschermende kleding.

Bio-based antimicrobial coatings and finishes for textiles

The aim of Bio-AmiCoFitex is to develop bio-based antibacterial and antifungal textile finishes and coatings complying with the criteria of the new biocide regulation. Because the rules and procedures to introduce biocidal products on the market will become much stricter, the textile industry has to look for non-hazardous alternative biocides. Biocides are used to prevent the growth of microorganisms.


Hydrophobic/Oleophobic functionalisation via PLAsma polymerisation coating of 2D and 3D textile materials

Project goal:

Within H/OPLA, we will use plasma coating for hydrophobic and oleophobic coating of high added value textiles.
The novel approach will be research and developed for two types of products:

FR : Determination of Fire retardants in Textiles

Standards on fire retardancy and flammability are becoming increasingly severe because of the high number of lethal casualties due to fire. It is therefore of vital importance to add flame retardant products to textiles.


Textile products with electric functionalities are being marketed as “smart textiles”. The European standardisation organism, CEN, has installed a workgroup TC248/WG31 where experts discuss the standardisation proposals related to ‘smart textiles’. At this very moment, a new work task is examining and developing the standardisation of conductive textiles.



We are pleased to invite you to the final conference of the Smart@fire project, that will take place on Wednesday 14 December and Thursday 15 December 2016, at Husa President Park Hotel in Brussels, Belgium


The main goal of the project is to develop filaments and yarns with improved mechanical properties by introducing thermoplastic microfibrillar reinforcements. These structures can be obtained by melt-processing technologies of specialty polymer blends.


Several European FP6/FP7 smart textiles projects resulted in a variety of high market potential developments. Representative NMP projects are SAFE@SEA–advanced personal protective clothing; POLYTECT–smart textile materials for reinforcing and monitoring infrastructure and DEPHOTEX–flexible photovoltaic textiles.


Flanders and the French regions of Nord-Pas de Calais and Somme have a large maritime industry, with worldwide activities. In order to reinforce their competetive position in a globalising economy, this industry is looking for opportunities to set up synergies with other industrial sectors. This is one of the objectives of both the Flemish Maritime Cluster FMC (Flanders) and AQUIMER (France).

The blue circle

Sustainable wastewater reuse and residual flow recovery

Because of the scarcity of water sources, more and more companies are “reusing” wastewater. However, the present wastewater treatment techniques allow only a partial water recuperation. This also leads to concentrate flows for which it is increasingly difficult to obtain a waste disposal licence. The lack of an appropriate treatment technique of concentrate flows that often prevents the implementation of a far reaching water reuse.


Flame-retardant textiles 2015: how to reconcile legislation, ecology and economy?

Because of the high number of victims and damages caused by a fire, it is logical that the standards regarding fire retardancy and inflammability are becoming increasingly severe. Therefore it is essential that flame-retardant agents are added to textiles. However, the use of these FR-products is strictly controled for several reasons: strict European legislation (REACH, CLP), strict requirement of eco-labels (European Ecolabel, Oeko-Tex® 100…). It goes without saying that the sector voices its concern. The textile industry insists on the development of alternative products and treatments complying with all these requirements.

Textile Dyeing in Ionic Liquids

Lately, the scientific as well as practical (application-oriented) interest in the so-called ionic liquids (IL) has been growing. IL represent an important class of materials, called “Green Solvents”. In general, IL are to be understood as ionic substances, that are already fluid from room temperature up to 120°C and that are often thermo-stable far beyond 200°C. IL excel by their extremely low vapour pressure, which makes them easy to handle in contrast to organic solvents.


Durable Biobased Plastics

Applications of biobased plastics in extrusion processes for durable end products

A successful transition of oil-based polymers to biopolymers demands that the (mechanical) properties of the latter can compete with those of synthetic polymers and that the stability of the products can be guaranteed over a longer period.


The PowerWeave project will develop a fabric to harvest and store electrical energy within its fibrous matrix, to fulfil a need for an easily deformable, storable and transportable power supply.This will be achieved through the development of PV fibres and energy storage fibres integrated with control electronics into a textile.


Rapid deployable kits as seeds for self-recovery

Most humanitarian organisations use stand-by emergency response units (ERU), to meet the immediate needs of people hit by disaster. Each ERU has a specific function, e.g. medical care, sanitation, energy provision, or water supply. S(P)EEDKITS aims at speeding up the emergency response and at providing the seeds for future development.

BARTEX: Barrier Properties

This project aims at the characterisation of barrier textiles in view of their classification, for a better and easier product selection by their users.


Development of a controlled degradation of synthetic or biopolymer textiles for special applications

The degradation of textile materials in carbon dioxide is an interesting route to resolve the end-of-life issues of a number of applications. In the case of agro- or geotextiles it is not always feasible to recover or remove the products in a quantative manner. For these applications natural fibres can be used, although their processing into specific structures is not so easy. Another alternative is the use of biopolymers but these materials do not always have the appropriate (bio)degradation profile either.

EnCoMed - Collagens for Medical Applications

Enzymatic functionalisation of collagens for medical applications

The aim of this precompetitive project is to develop new methods for the enzymatic functionalizing of native collagen structures and to use these structures as scaffolds in tissue engineering and drug delivery systems.


Development of improved PolyOlefin MELt ADhesion fibres and yarns and their implementation in textile applications

The control of the melting and weakening trajectory and the adhesion of polyolefin fibres is becoming more and more important for many textile applications. Examples can be found in composites, where the polyolefin fibres are compressed to a composite structure. In new type of composites, the matrix and the strengthening fibres are made from the same family of materials. The combinations of many polyolefin materials lead to various possibilities for different types of composites.

Phthalates in textiles

Development of test methods to determine phthalates in textiles

The coating of flexible PVC’s is an important industrial activity in the Belgian production of floor coverings, cables, tarpaulins, (car) seats, dashboards, sun visors, clothing and tapes. PVC owes its economic importance to its durability (very high stability), the relatively low costs and large production runs.

Green Nanomesh

Hernia operations are among the most common surgical procedures performed today with over 20 million cases annually worldwide. Hernia incidents are associated with pain and poor quality-of-life for the patient and lead to enormous healthcare costs, exceeding US $48 billion in the US annually.


With the SmartNets project, Centexbel wants to study SME networking for the development of new products. We work together with the Belgian partners LAMPE TEXTILES and DEVAN CHEMICALS and several other European partners.
SmartNets is a European FP7 project.

Nature Wins

Research for the development of fully renewable thermoplastic bio-composites

Europe has set forward a new goal: the development of composites based on (nearly) 100% renewable products. This implies that both the fibre reinforcement and the matrix fraction (thermoset or thermoplastic) have to be bio-based.


Integrated solutions for an improved sleep quality

ALL4REST, is focused on the development of comfort‐improved sleep systems, using non‐obtrusive technologies promoting a deeper and better recovering sleep and preventing nocturnal awakenings. The successful solutions will reduce the number of awakenings and/or the time to fall sleep after an awakening and reduce sleep onset latency (the length of time that it takes to accomplish the transition from full wakefulness to sleep).

Bio-based Flexible Materials

Research on the suitability of biopolymers textile and packaging applications

Biopolymers have become a topical theme and are becoming increasingly important in the European textile sector. Therefore, Euratex has incorporated them in their "strategic research agenda" for textiles.


PLACEit_logo-new_201006_small.pngImagine a lamp that is not fixed to the ceiling, but that can be designed into any shape, or even blend into the surroundings. This would give a tremendous design freedom. Think of curtains that emit light to mimic the natural, daytime situation, children with illuminating jackets to safely bike home from school, or even bandages that shine light on the body to treat skin diseases or for infrared massage.

Hybritex: Eco-efficient hybrid coatings

The advent of globalisation has urged the European textile industries to implement new technologies to maintain the cost-effectiveness of the sector. One such development is the application of of thin silane finishes on textiles, a development that has been introduced during the last decade. The extraordinary properties of these (functionalised) finishes include a.o. enhanced abrasion resistance and omniphobicity.


The aim of the Bacteriosafe consortium is to construct, test and develop a unique active wound dressing, which incorporates novel colourimetric sensor and active therapeutic processes for detecting and counteracting pathogenic bacteria in wounds.

Carbon nanotubes II

The research project’s aim is twofold: on the one hand, the acquisition of further knowledge is needed to apply the exceptional properties of CNTs in the best way; on the other hand, there is a growing need of highly and durably conductive textiles that are easy to process.
The applications of CNTs within the scope of this project are mainly situated in the field of conductivity. The level of conductivity depends on the application method (extrusion, coating, textile finishing) and the desired end product.

Ovart: assembly of artificial ovary

Assembly of an artificial ovary combining isolated human ovarian follicles, fibrin and a textile pocket

The objective of this project is the development of a 3D biodegradable matrix allowing the graft of autologous ovarian tissue or isolated follicles in patients with impaired fertility following a gonadotoxic treatment. This biofunctional fibrin-based matrix will limit the follicular loss due to post-transplant ischemic stress and will help to induce the formation of an extracellular ovarian-like matrix by promoting cell migration, cell proliferation and vascularization.

FAFEX: Inline fibre finishing at fibre extrusion

The objective of the FAFEX project is to integrate the finishing step in an earlier process phase, and more in particular during the yarn extrusion phase by applying an aqueous polymer solution onto the filament's surface during melt spinning.

CleanCloth: Antibacterial Cloth Based on Microfibre

In the CleanCloth project, we propose to develop a superior cleaning cloth with constant and continuous antibacterial effect, ensuring that no bacteria is left in the cloth and making bacterial re-growth impossible, without need for special and time-consuming hygiene procedures. This will be accomplished by a unique technology with antibacterial agent integrated into the microfiber of the cloth. The advances in this technology will allow significant reduction of cross-contamination and bacterial regrowth. Infectious diseases arising in the home setting are a significant concern.


The main objective of Safe@Sea is to develop a new generation of advanced personal protective clothing for the fishing industry that will lead to a significant increase in safety without reducing work performance.

Cilab: composite innovation laboratory

CILAB (Composite Innovation LABoratory) is a 4 years project dedicated to innovation in the field of composite materials and structures including research, development and improvement of manufacturing processes (eg. liquid resin infusion, vacuum assisted processes, hybrid composites - continuous fibres and short fibres - with thermoplastic matrices, braided structures, ...), materials (eg. bio-composites), non destructive inspection techniques (eg.

Resistance against the penetration of bacteria

In order that the market can grow to the profit of the local industry, good (and therefore reproducible) standards are needed to evaluate medical textiles, and more in particular textiles used in operating theatres subject to European regulations. Textiles used in operation theatres are considered as medical devices and must therefore meet certain requirements (EN 13795) in the framework of CE labelling.

Fibre-reinforced thermoplastics

Fibre-reinforced plastics or composites are applied in an increasing number of products all over the world.

Novel Temperature Regulating Fibres and Garments

NoTeReFiGa aims at developing novel temperature regulating fibres and innovative textile products for thermal management, selected by the SME segment of the European textile industry. The temperature regulating effect will be realised by incorporating large amounts of phase changing materials (PCM) into textile fibres.


Currently the world of polymeric composite materials is exclusively based on fossil derived components. This fact represents a strong issue, as the non-renewable global oil resources are being exploited year after year, also as a consequence of the ever growing demand for plastics engineering materials. As a concrete answer to the increasing volumes of building and construction materials processed and transformed by industry in almost all sectors, renewable resources need to be exploited in order to reduce the depletion of oil reservoirs, and the associated ecological issues deriving, provided they can grant quality standards comparable with the currently available materials.

Dimetex: DIspositifs MEdicaux TEXtiles

DIMETEX is part of an Interreg IV cross-border cooperation programme for the textile industry and regroups players from the Walloon Region of Belgium as well the Nord-Pas de Calais and Picardy Regions of France.

The medical segment is one of the main segments to demonstrate many assets and a strong power of attraction for producers of technical textiles.

Three areas of study have been identified in an effort to represent the major opportunities for the development of SMEs within the region.


Envimedia/ Platform for health and environment

envimedia.jpgOpen platform integrating lasers, sensors, technological components and systems for the detection, measurement and recognition for air quality monitoring, noise pollution monitoring, healthcare monitoring of the elderly at home, imaging and medical care.

Monsotex: Sleep monitoring through smart textiles

3 to 4% of the population suffers from sleep disorders, often causing severe health problems.

The MONSOTEX projects aims at developing a system for (remote) sleep monitoring, based on the use of smart textiles with several embedded psychometric sensors (electro-cardiogram, respiration, temperature...).

MEDIATIC: Textiles with a variety of integrated sensors

Textiles with a variety of integrated sensors for comfort assessment, remote heath monitoring, and home healthcare